 |
X20CrMo13 Strip DIN 1.4120 Cold Rolled Special Stainless Steel Strip Thickness 0.25 0.30 0.60mm Material EN 1.4120, DIN X20CrMo13KG, special steel strip, sealing strip, Boehler T602, cold rolled, annealed, bright pickled, edges cut, in coils Typical thickness 0.25/0.30/0.60/0.80mm C Si Mn Cr Mo Ni 0... Read More
|
| |
AISI 431 EN 1.4057 DIN X17CrNi16-2 ( also called ASTM 431 ) is a high tensile strength martensitic stainless steel with good machinability. Recently we have production for thickness 1.0mm, 1.2mm, 1.5mm 431 stainless steel sheets. Read More
|
| |
These days we have finished project for X3CrNiMo13-4 stainless steel plates, thickness 40/55mm. W.-nr. 1.4313 ( DIN X3CrNiMo13-4 ) a 13% Cr-4% Ni-0.5% Mo a low–carbon martensitic stainless steel with basic corrosion resistance, good strength, good toughness and much better weldability than most ... Read More
|
| |
17-7PH is a chromium-nickel-aluminum precipitation hardening stainless steel that provides high strength and hardness and a moderate level of corrosion resistance up to 600˚F. This grade can be easily formed in the austenitic condition similar to Type 301 stainless steel and hardened to high ... Read More
|
| |
Blade steel 8Cr13MoV, same as AICHI AUS8, increased more carbon contents, added vanadium and molybdenum, improved more hardness, wear resistance, annealing resistance. Material 8Cr13MoV stainless uses are high-quality knife, scissors, pocket knife, medical equipment, food machine, mechanical parts ... Read More
|
| |
17-4PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and shorttime, low-temperature heat ... Read More
|
| |
Ferritic, heat resistaing grade AISI 446, UNS S44600, JIS SUH446 stainless combines the following characteristics: Good oxidation resistance Excellent resistance to sulphidation particularly in reducing conditions. Much better than austenitic heat resisting grades due to absence of nickel Good ... Read More
|
| |
We finished production for Grade 1.4122 stainless steel round bars, centerless ground, dia 12.4mm. This grade EN 1.4122, DIN X39CrMo17-1, X35CrMo17 stainless steel is available in forms of round bar, wire, sheet / plate, and strip coil. 1.4122 is a martensitic grade with enhanced corrosion ... Read More
|
| |
Ferritic grade 444, a low carbon and low nitrogen ferritic stainless steel containing 18% chromium, 2% molybdenum. The alloy is stabilized with additions of columbium and titanium for resistance to intergranular corrosion. One big advantage of material stainless 444 over austenitic stainless steels, ... Read More
|
| |
Recently we finish production for ASTM A268 ASME SA268 Specification AISI 446-1, UNS S44600, TP446-1, EN number 1.4749, DIN X18CrN28 stainless steel tubes. It's equivalent to Sandvik 4C54 grade. Seamless steel tubes manufactured by cold finished ( cold rolled and cold drawn ), then annealed, pickled... Read More
|
