 |
Ferritic, heat resistant stainless steel grade AISI 446, UNS S44600, the main alloy element in the ferritic grade is chromium, characteristic properties Excellent resistance to oxidising and reducing sulphur containing atmospheres Good resistance to oxidation High thermal conductivity – low thermal ... Read More
|
| |
Medical alloys, including implant materials, and instrument grades. We supply materials followed by ASTM F899, Typical grades: Martensite 13% Cr, AISI 420A 1.4021 AISI 420B 1.4028 AISI 420X 1.4031 AISI 420C 1.4034 1.4028Mo AISI 431 1.4057 AISI 440A 1.4109 AISI 440B 1.4112 AISI 440C 1.4125 17-4PH, ... Read More
|
| |
Martensitic stainless steel 420 grade, high carbon type, to be hardened by heat treatment. Typical applications: blades for knives, cutting tools, medical instruments, mechanical parts. Recently we finish project 420 high carbon stainless steel plate, thickness 10.0X1250X4020mm, laser cut to drawing... Read More
|
| |
We have JIS G4313 standard specification cold rolled stainless steel strip for springs, grades SUS301, SUS304, SUS420J2, SUS631 Thickness 0.02~1.5mm X width 5~650mm Delivery condition: ANN, 1/2H, 3/4H, H, EH, SEH The pictures for 301 Stainless steel strip coil, cut to lengths. 0.8X400X1000mm, HV 460 Read More
|
| |
Cold drawn stainless steel wire in martensitic grades AISI 420 offers very good formability that after hardening and tempering is characterized by high corrosion resistance and toughness. AISI, ASTM EN, DIN C Si Mn Cr 420A 1.4021, X20Cr13 0.16~0.25 1.00 max 1.50 max 12.00~14.00 420B 1.4028, X30Cr13 ... Read More
|
| |
446 1.4749 UNS S44600 is a ferritic heat resisting steel useful up to 1100°C. 446 stainless grade combines the following characteristics: Good oxidation resistance Excellent resistance to sulphidation particularly in reducing conditions. Much better than austenitic heat resisting grades due to ... Read More
|
| |
Medical alloy, Special Implant Materials Austenite, AISI 316LVM, UNS: S31673, EN 1.4441, DIN X2CrNiMo-18-15-3 is a high alloy super-duplex (austenitic-ferritic) stainless steel for service in highly corrosive conditions. The 316LVM stainless grade is characterized by: High strength High fatigue ... Read More
|
| |
SUS631, 17-7PH is a precipitation hardening semi-austenitic stainless steel. It is able to develop a very high strength due to the strengthening of aluminium particles. It is usually found in strip or wire form for spring applications. AISI/UNS EN/DIN JIS Chemical composition % 17-7PH S17700 1.4568 ... Read More
|
| |
PH 15-7Mo Stainless Steel is a semi-austenitic, precipitation-hardening stainless steel that provides high strength and hardness, good corrosion resistance and minimum distortion on heat treatment. It is easily formed in the annealed condition and develops an effective balance of properties by ... Read More
|
| |
Martensitic steel grades and precipitation hardening (PH) stainless steels are heat treatable and can therefore provide hardness and strength in a wide range of applications. Allowing to workability they are supplied in solution annealed condition. The downstream manufacturer performs final heat ... Read More
|
