Payment & Shipping Terms:
|Material:||JIS SUS420J1, EN 1.4021, AISI 420A, DIN X20Cr13||Product:||SUS420J1 Stainless Steel Strip|
|Edge:||Cut Edge, Dressed Edges On Request||Delivery Condition:||Annealed|
420 stainless steel strip,
stainless steel precision strip
JIS SUS420J1 EN 1.4021 AISI 420A Cold Rolled Precision Stainless Steel Strip Coil
Martensitic stainless steels typically contain 12 to 17% chromium and nickel in a range of 0 to 5%.
The low nickel content ( compared to austenitic stainless steels ) offers the secondary advantage of a lower material cost.
They fall into 4 subgroups.
1. Fe-Cr-C steels, there were the first grades put into use and still widely used in engineering
and in wear resistant applications.
2. Ni-bearing grades, in which Ni replaces some of the C. Compared to the previous group,
they offer a higher toughness particularly at low temperatures.
Their higher Chromium content leads to a higher corrosion resistance.
Molybdenulm additions in groups 1 and 2 improve further the corrosion resistance.
3. Precipitation hardening stainless steels, offer the best combination of strength and toughness.
4. Creep resisting steels, with about 11% chromium, differ from subgroup 1 by additions of Co. Nb,
V and B which increases of high temperature strength and creep resistance up to 650℃.
|Group 1||Group 2||Group 3||Group 4|
ASTM 410, 420
EN 1.4006, 1.4021, 1.4028, 1.4031, 1.4034
b. wear resistant
EN 1.4109, 1.4112, 1.4125
ASTM 431, S41500, F6NM, S165M
EN 1.4057, 1.4313, 1.4418
ASTM S17400, S17700, S15700, S15500, S13800
630, 631, 632
17-4PH, 17-7PH, 15-7Mo, 15-5PH, 13-8Mo
EN 1.4542, 1.4568, 1.4574, 1.4545, 1.4534
With Co, Nb, V, B additions
EN 1.4913, 1.4923
JIS SUS420J1 stainless belongs to Group 1, a very popular martensitic stainless steel that is corrosion
resistant in water and steam.
Chemical composition ( weight % )
|JIS SUS420J1 = EN 1.4021, DIN X20Cr13 = AISI 420A, UNS S42000||0.16~0.25||1.00||1.00||12.00~14.00|
SUS420J1 stainless hot-rolled strip, cold-rolled strip, slit strip, narrow strip, precision strip steel, cut sheets
Contact Person: Paul Lu