8Cr13MoV High Carbon Stainless Steel Sheet
8Cr13MoV is a high-carbon, excellent value-priced stainless steel, which features
quite similar performance characteristics to AICHI AUS-8 in terms of toughness, edge retention, and wear resistance.
The 8Cr13MoV stainless blades have been fully proved by assorted highly successful and well renowned knives,
like Spyderco Byrds, Spyderco Persistence, Spyderco Tenacious, as well as Benchmade Vex, Benchmade Pikas
| Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
V |
| 8Cr13MoV |
0.72~0.77 |
0.30~0.60 |
0.30~0.60 |
0.035 max |
0.030 max |
13.50~14.00 |
0.50 max |
0.20~0.25 |
0.10~0.15 |
The AUS Series ( AICHI TECHNO METAL FUKAUMI Co., Ltd. )
The biggest improvement of the AUS series over the 400 Series is the addition of vanadium which
improves wear resistance and gives good toughness. It also reportedly makes the steel easier to sharpen.
| Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
Co |
| AUS-4 |
0.40 - 0.45 |
0.80 max |
1.00 max |
0.040 max |
0.005 max |
13.00 - 14.50 |
0.60 max |
- |
- |
| AUS-6M |
0.55 - 0.65 |
0.80 max |
0.85 max |
0.040 max |
0.005 max |
13.00 - 14.50 |
0.10 - 0.30 |
0.10 - 0.25 |
- |
| AUS-8 |
0.70 - 0.80 |
0.80 max |
0.50 max |
0.040 max |
0.005 max |
13.00 - 14.50 |
0.10 - 0.30 |
0.10 - 0.25 |
- |
| AUS-10 |
0.95 - 1.10 |
0.80 max |
1.00 max |
0.040 max |
0.005 max |
13.00 - 14.50 |
0.10 - 0.30 |
0.10 - 0.25 |
- |
AUS-6M
Has .65% carbon, certain elements molybdenum and vanadium added,
which is comparable to W.-Nr. 1.4116 DIN X50CrMoV15.
AUS-8
Has .75% carbon. Cold Steel has made popular use of this steel.
This is tough steel, and holds an edge well.
AUS-10
Has 1.1% carbon. This steel is comparable to 440C stainless.
It has more vanadium and less chromium than 440C so it is slightly tougher, but also a little less rust resistant.
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
Your message must be between 20-3,000 characters!
