Payment & Shipping Terms:
|Martensitic Grade:||1.4021 , 1.4028 , 1.4031 , 1.4034||Product:||1.4021 1.4028 1.4031 1.4034 Cold Rolled Stainless Steel Slit Strip Coil|
|Delivery State:||Soft Annealed||Edge:||Cut, Round Corner, Deburred|
440 stainless steel,
420 stainless steel
Martensitic 1.4021 , 1.4028 , 1.4031 , 1.4034 cold rolled stainless steel slit strip coil
Alloy 420 is a hardenable, martensitic stainless steel that is a modification of Alloy 410. Similar to 410 stainless,
it contains a minimum of 13% chromium, just sufficient enough to give corrosion resistant properties.
Stainless Alloy 420 has higher carbon content than Alloy 410 which is designed to optimize strength
and hardness characteristics.
It has good ductility it the annealed condition but is capable of being hardened up to Rockwell hardness 55 HRC,
the highest hardness of the 13% chromium grades. Due to its hardening properties, stainless 420 is not
often welded, although it is possible. Martensitic stainless steels are designed for high hardness and sometimes
other properties are to some degree compromised. Corrosion resistance is lower than the common austenitic
grades and their useful operating range is limited by their loss of ductility at sub-zero temperatures and loss
of strength by over-tempering at elevated temperatures.
Its best corrosion resistance is achieved when the metal is hardened and surface ground or polished.
Among 420 stainless family group, it consists of 5 types according to its carbon content.
|EN 1.4021, DIN X20Cr13, ASTM 420A||0.16~0.25||12.00~14.00|
|EN 1.4028, DIN X30Cr13, ASTM 420B||0.26~0.35||12.00~14.00|
|EN 1.4031, DIN X39Cr13, ASTM 420X||0.36~0.42||12.50~14.50|
|EN 1.4034, DIN X46Cr13, ASTM 420C||0.43~0.50||12.50~14.50|
stainless steel strip coil, hot and cold rolled, soft annealed
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless ferritic — Our answer to your needs
Tel: +86 510 81812873
Contact Person: Paul Lu