Payment & Shipping Terms:
|Surface:||Bright, Black, Pickled||Material:||Stainless Martensitic AISI 440C ( UNS S44004 )|
|Product Name:||Stainless Steel Sheet And Coil||Certification:||SGS|
AISI 440C ( UNS S44004 ) high carbon stainless steel sheet and plate
440A/440B/440C 1.4109/1.4112/1.4125 S44002/S44003/S44004
The 440 grades form a series of high carbon martensitic stainless steels.
They have basic corrosion resistance and extremely high hardness and wear resistance.
Approximate Composition – 16% Cr, 0.60-1.0% C plus Mo and V in EN grades.
This grade combines the following characteristics:
This series of grades give the highest level of strength/hardness in any martensitic stainless steel. Consequently, they are used where a basic level of corrosion resistance is required coupled with high
wear resistance or blade sharpness. They are usually supplied in the annealed condition for improved machinability and then hardened and tempered to develop the high hardness.
Applications which illustrate these features include:
Bearings, valves, knife blades, surgical instruments, tools, moulds, dies.
Composition of stainless 440C ( Nominal )
0.95/1.20 C, 1.00 Mn, 0.040 P, 0.030 S, 1.00 Si, 16.00/18.00 Cr, 0.75 Mo, Bal. Fe
Type 440C is capable of attaining very high hardness; approximately Rockwell C 60. This stainless principally has been used in bearing assemblies, including bearing balls and races.
Specifications: ASTM A314, ASTM A473, ASTM A493, ASTM A580, ASTM A756, AMS 5618, AMS 5630, AMS 5880, QQ-S-763
Chemical composition ( % typical )
We are looking forward to receiving your enquiry.
please welcome to contact our sales.